Design Process Series, Installment Five – Pattern Writing

Well, there you have it folks. We’ve made it all the way to Installment Five before we actually begin writing the pattern. I guess I always thought that it was the hard and time-consuming part, but really, it’s part that I find comes the easiest and doesn’t take nearly as long as I had originally anticipated.

Once I’ve determined what yarn, stitch patterns, construction techniques and dimensions I want to use, it’s time to put it all together into words. And those words need to make sense to absolutely anybody and everybody who reads them, providing they know a bit about knitting. I guess that’s where my science background comes in handy. I see pattern writing as essentially the same thing as writing a lab report, and boy have I written a lot of lab reports over the years!

First you have your Purpose/Hypothesis: I give a brief introduction to the pattern, usually touching on the inspiration for the piece and the important design details. The hypothesis is that if you follow these instructions then you will end up with an item looking like the one in the picture, more or less.

Next, your Materials: The amount and type of yarn needed, needle type and size, tapestry needle, various other implements and notions.

Then on to Methods: Starting off with a glossary, followed by step-by-step instructions of how to “replicate the experiment” / “knit the garment”.

And finally, Conclusions: I like to (and you really should) include a drawn-to-scale schematic showing the finished measurements of the blocked piece.

Also, like in a lab report, I try to stick with a third-person, passive voice. I guess it’s my training, it just seems natural to me that this should be the way to write instructions. There has been some debate about this, and I must say I don’t adhere to it 100%. There are often times that it comes across sounding weird, and other times where I just want to lighten the mood a little. Like in the upcoming Helen Pencil Skirt, I have one section called “The Straight Part” and another called “Hip to Waist Shaping (AKA the Curvy Part).” The beauty of this not actually being a lab report is that it’s okay to not take yourself too seriously now and then.

Another aspect of pattern writing that draws some debate is whether to write first and knit later, or vice versa. For my first pattern I worked out all the numbers, knit the pattern taking notes along the way, and then wrote the pattern. This seemed like a good idea at the time, and it didn’t work out too badly, but in the end it’s not the ideal method for me. For one, I am not the most organized nor diligent person in the world. I had to do some real sleuthing to figure out what I had done when it came time to write it all down weeks later. Also, once the pattern was written I didn’t know for sure that it was easy to follow again. So then I knit a whole other sample. For all subsequent patterns I have written the pattern first and then sat down and knit the sample from the instructions. Yes, this means tinkering with the pattern along the way, but it’s much easier to make adjustments to the pattern once it’s written. And it also lets me find possible mistakes and ambiguities that I might not have noticed otherwise.

The hard part of pattern writing for me is formatting. In an ideal world I’d be using something like Corel Draw or InDesign to put together my patterns in a very lovely snazzy-looking way. But, the world not being ideal, I don’t have the budget to fork out thousand(s) of dollars for those programs. And I’ve tried working with free programs like Inkscape and Scribus, but the learning curve is so steep that I have a hard time dedicating my time to figuring them out. So, sadly, I hobble my patterns together in Microsoft Word and use CutePDF to convert them to PDF’s. The end product still looks good, and it gets the information to the consumer, but maybe when I grow up I’ll get them looking real fancy-like. For now, here’s a little view of what my patterns look like.

Image

Join me next week at the same bat-time on the same bat-channel for Installment Six – Editing and Testing.

Design Process Series, Installment Three – Submissions

Vacation (and summer almost) over, back to the blog. Time for the third installment of the design series, in which I’ll cover the submission process.

I’m certainly not an expert when it comes to this aspect of the business. I have had success and failure, both with the pattern featured in this series in fact. But I’ve answered calls for submission a few times now so I can pass on what I do know.

Typically a company will put out a “Call for Submissions,” in which they detail what they are looking for in terms of color, yarns, themes, etc. If I have something in my “little book of ideas” that seems like it would be a good fit for the Call, I put together a submission.

A submission is basically a one to two page showcase of your idea and how it would come to be. It should include, at minimum, a sketch of the idea, a swatch, suggested yarn(s) and a little blurb about the pertinent details of the design. It’s also helpful to include a schematic showing the dimensions of the piece, a bit about the construction, and short bio of the designer with some examples of previous work.

So what are you  hoping to gain by submitting a proposal to a yarn company, magazine, publisher, etc? Almost always you’ll get yarn support, that is, yarn provided to you at no cost, to knit the sample. Sometimes the company will provide editing, photography, layout and promotion, or any/all of the above. In return for your design and written pattern you may get paid a flat fee, royalties, or sometimes nothing at all, just the promise of “exposure”.  Some deals are better than others and you must really weigh all your options and consider just what it is you’re looking for from the arrangement.

Here is an example of a successful submission (with a few details removed.) One very similar to this was submitted to and rejected by Knit Now magazine. But, not accepting defeat, I modified it slightly to fit the format requested by Knit Picks and resubmitted the idea to them. This time I had success, and you should be seeing the new pattern within the next few weeks.

That’s about it for this phase of the process, next up – Math and Grading!

Image

Introducing The Eleanor Romper

After a long drought, I have finally released a new pattern, the Eleanor Romper! This was my first pattern through the Knit Picks Independent Designer Partnership program, and hopefully the first of many. I really enjoyed working with them, and their yarn.

whole thing main

The Eleanor Romper is a darling little one-piece outfit for babies. Worked with a seamless top-down raglan construction, the romper features a simple but elegant cable pattern running down the sleeves as well as the sides, all the way down to the ankles. 

neckline raglan and cables

cables and feet

The design is suitable for boys or girls so it can be a gender-neutral baby gift or made more masculine or feminine with color and button choice. This is the kind of garment that will be cherished by parents and passed down through generations.

leg button bands rotated

I would like to give a huge Thank You! to Ryan and Vanessa Barr for letting me photograph their adorable little girl!

whole thing 3

Also, to Eleanor Dixon for another wonderful job with Technical Editing.

You can download the pattern, and even buy the yarn at the same time, at Knit Picks website.

Design Process Series, Installment Two – Yarn Selection and Swatch

Once I had an idea of how I wanted the skirt to look, I needed to move on to yarn selection. In my head I was picturing something with a bit of halo to it, maybe some mohair. Having never worked with it before I didn’t really know what was out there. As it turns out, mohair is usually mixed with something else like silk, and it’s also generally very fine weight, like lace or cobweb. I wanted something a little more substantial than that since otherwise I would have been knitting forever!

I headed to my favorite local yarn store, The Loop in Kensington. I was able to describe what I was hoping to achieve and within minutes the very knowledgeable Diana had it all figured out for me. I came out of there with two yarns: Schulana Kid-Seta, a 70% mohair, 30% silk 2-ply lace-weight yarn; and Berocco Ultra Alpaca Light, a 50% Alpaca, 50% Wool 3-ply sport-weight yarn. The two yarns held together provided just the right weight, strength and texture that I was looking for. I was able to find two coordinating colours that were just beautiful together.      Schul and Berocco Yarn and Swatch

The next step was to draw up a chart of the diamond pattern and then put together a swatch. I’ve learned in the last year or so of designing that “meaningful” swatches are of the utmost importance when designing. They are not only useful for determining your gauge but also trying out increases, decreases, edgings, etc. My swatch for this pattern included not just the diamond motif, but also the stockinette stitch hem that I was planning on incorporating. I was delighted with how this one turned out.

Schul and Ber SwatchIn the end, after submitting my idea to Knit Picks, I ended up with yarn support from them. I was able to find two yarns of theirs that had almost the same properties of those from my original swatch: Aloft Super Kid Mohair, a 75% Super kid mohair, 25% silk lace-weight yarn; and Andean Treasure, a 100% Baby alpaca sport weight yarn. Once received, I made another, smaller swatch in just the diamond pattern with the new yarn.

Knit Picks yarn and swatchThe two swatches matched stitch and row gauge exactly so I was a very happy camper. The two Knit Picks yarns have a little more contrast between the colours, which I actually like in the end. I find it makes the fabric have a tweed-ish look to it. And oooh, is it ever soft!

both yarns and swatches

Stay tuned for the next post – The Submission Process (Yeah, I know, I said that last time, but I realized after the fact that I needed to talk about swatching first).